1. Set up a tiny (3.5″) display on one of the Raspberry Pis -
2. then slap Kali Linux on that device.
3. House Temperature / Humidity Sensor Monitor and  Kitty Cam
4. Media Center – Will it Do Netflix? 

Possible others:

• A Pip Boy!
• Retro Game Machine

Since I’ve recently received for Fur-baby father’s day last Saturday at Micro Center -

MCM Electronics Raspberry Pi 2 Model B Camera Kit  -

Raspberry Pi 2 Model B Board, 8GB Operating System microSD Card, Multicomp Clear Pi 2 Model B Case, Raspbery Pi Wi-Pi wireless ethernet adapter, Raspberry Pi Power Supply, Pi Camera, 36 Page Raspberry Pi User Guide

MCM Electronics Raspberry Pi 2 Model B Media Center -

Raspberry Pi 2 Model B Board, 8GB Operating System microSD Card, Multicomp Black Pi 2 Model B Case, Raspberry Pi Power Supply, Wi-Pi Wireless Adapter, 3′ HDMi Cable, 7′ Ethernet Cable, 36 Page Raspberry Pi User Guide

MCM Electronics Raspberry Pi 2 Model B Complete Kit

Raspberry Pi 2 Model B Board, 8GB Operating System microSD Card, Multicomp Clear Pi 2 Model B Case, Raspberry Pi Power Supply, Wi-Pi Wireless Adapter, Raspberry PI Drawstring Bag, Raspberry Pi Power Supply, Wi-Pi Wireless Adapter, Cyntech Raspberry Pi Hub, USB Keyboard, USB Mouse, 3′ HDMi Cable, 36 Page Raspberry Pi User Guide

(To make the Keyboard behave properly with the Raspberry Pi, I had to do the following -

• Switch to root user.
• Run ‘dpkg-reconfigure locales’ and change from en_GB.UTF-8 to en_US.UTF-8.
• Run ‘dpkg-reconfigure keyboard-configuration’ and change the keyboard to USA PC104 )

Additionally, I still have my Arduino Starter Kit. (from my Birthday haul this year)

1 x Arduino Projects Book
1 x Arduino UNO Rev 3 microcontroller
1 x USB cable
1 x Breadboard
1 x Easy-to-assemble wooden base
1 x 9V battery snap
70 x Solid core jumper wires
2 x Stranded jumper wires
6 x Photoresistors
3 x Potentiometers (10K ohm)
10 x Push buttons
1 x Temperature sensor
1 x Tilt sensor
1 x Alphanumeric LCD (16×2 character display)
1 x Bright white LED
1 x Multicolor RGB LED
8 x Red LEDs
8 x Green LEDs
8 x Yellow LEDs
3 x Blue LEDs
1 x Small DC motor (6/9V)
1 x Small servo motor
1 x Piezo capsule
1 x H-bridge motor driver
2 x Optocouplers
5 x Transisitors
2 x Mosfet transistors
5 x 100nF capacitors
3 x 100uF capacitors
5 x 100pF capacitors
5 x Diodes
3 x Transparent gels (red, green, blue)
1 x 40 pin male header strip
20 x 220 ohm resistors
5 x 560 ohm resistors
5 x 1K ohm resistors
5 x 4.7K ohm resistors
10 x 10K ohm resistors
5 x 1M ohm resistors
5 x 10M ohm resistors

I’ve also ordered:

PiTFT Plus 480×320 3.5″ TFT+Touchscreen for Raspberry Pi – Pi 2 and Model A+ / B+ PID: 2441

Raspberry Pi Model B+ / Pi 2 Case Lid – Clear PID: 2257

Pi Model B+ / Pi 2 Case Base – Clear PID: 2253

Assembled Pi Cobbler Plus – Breakout Cable for Pi B+/A+/Pi 2 PID: 2029

I may investigate a battery pack later, but for now, plugging into the wall looks good. 

Originally published at The Scotto Grotto. You can comment here or there.